Techase Exhibition Broadcast | Aquatech China 2020
Updated：2020-08-31 15:02
On 31St August, Aquatech China 2020 opens at National Exhibition and Convention Center in Shanghai.
Techase brings three typical products to the exhibition with excellent quality and high technological contents, and has impressed the visitors deeply.
Besides Techase Multi Plate Screw Press, Super-high Pressure Filter Press, This year, Low Temperature Sludge Dryer also appears at the exhibition, with final moisture content ≤10% (adjustable).
Three Typical Products
Low Temperature Sludge Dryer
Techase low-temperature drying machine is the method of injecting circulating, warm and dry air to remove the water in the sludge cakes produced by the sludge dewatering equipment such as multi plate screw press, plate and frame filter press, and super high pressure filer press. The water in the sludge cake evaporates and is taken away, and reaches to reduce the sludge.
Advantages
*Low moisture of sludge cake
Remove the sludge moisture to 10-30% from 83%
*High safety performance
Low temperature below 70℃ and no dust risk
*Full seal design
*Low operating cost
*Highly automated.
Techase Multi Plate Screw Press
Advantages
* Different screw shaft
1.Techase’s screw shaft with ANSYS model analysis, the parameters of the screw shafts are adjusted according to the characteristics of sludge to ensure the operation effect of the product. According to the characteristics of different industries, special screw shaft for the industry are introduced, such as petrochemicals, fruits and vegetables, paper making, rivers and lakes, sludge concentration, starch protein, cyanobacteria, etc.
2.Special surfacing welding with superwear-resistant hard alloy layer, which increases the thickness by 150 times and the service life by more than 2 times.
*Longer life service rings
CFRP material, more corrosion resistance, longer service life
*Wide applications
*No sludge piling, no blockage
*Low speed operation, no noise, low energy consumption
Super high pressure filter press
The super-high pressure filter press is a kind of high efficiency filtration equipment and solid liquid separation equipment independently developed by Techase and Tongji University. Compared with the traditional filter press, it is more efficient.
Advantages
*Large compression ratio
Large spring compression, large secondary pressure, lower feed filtration load, short working cycle
*Large effective filtration area
Parallel extrusion without dead Angle, and the diaphragm filter press is semi-circular extrusion with uneven stress and convex point, occupying the effective filtration area.
*Large secondary pressure
*High efficiency
*Longer life service of filter plate
------------------------------------------------------------------------------
Techase Booth: 8.1H706
Time: 31 August – 2 September
Location: Shanghai National Exhibition and Convention Center （Hongqiao）
Looking forward to seeing you!
扫一扫咨询微信客服